Fale com um especialista:

55 21 3620-7777

Coletor de dados

TECTON

Lideres nas cadeias de suprimentos requerem soluções de computação móvel que reúnam as necessidades dos usuários, as demandas dos setores logísticos e a velocidade das empresas.

Com classificação IP65, formato ergonômico, gatilho removível e uso de um processador PXA320 806MHz com plataforma Windows CE 6.0 ou Mobile 6.5, o computador móvel Tecton está muito mais preparado para estes desafios.

Como sucessor do MX7, o Tecton reforçou a sua performance e somou novas características para otimizar produtividade na cadeia do suprimento para os usuários. Teclado protegido contra agentes químicos e cobertura de epoxi para evitar desgaste prematuro.

Componentes elétricos são soldados e colados sobre as placas de circuito para aguentar eventuais quedas e vibrações. A proposta de sua concepção, com gatilho removível provendo uma alternativa ergonômica de maior performance para leitura de código de barras a distância aumentando a produtividade e eficiência do operador.

As opções para desenvolvimento do Tecton são praticamente sem limites, com Tecnologia proprietária “Tough Talk” para aplicações por comando de voz, suporte veicular e muitos outros acessórios, todos compatíveis com as instalações já existentes do MX7.

Esta é a base de nossa cadeia de abastecimento – Reinvenção.

Part Number

Tecton DS

Acessórios

Batteries
MX7392BATT – Tecton Main Battery, Lithium Ion. It can also be used with MX7.
MX7396BATTERY – Tecton CS Main Battery, Lithium Ion, Low-temperature. It can also be used with MX7CS.
MX7394BATT – Tecton Main Battery, Lithium Ion, 10-pack. It can also be used with MX7
MX7398BATTERY – Tecton CS Main Battery, Lithium Ion, Low-temperature, 10-pack. It can also be used with MX7CS

Chargers
MX7390CHARGER – 4 Unit Main Battery Charger with power supply and US power cord. US power cord included.
MX7391CHARGER – 4 Unit Main Battery Charger with power supply, C14 type power cord required. AC power cord is not included. A country specific power cord must be purchased separately. When this product is shipped internationally it may be necessary to order and ship the appropriate internation AC power cable at the same time. This product has a C14 style AC power connector. Choose the proper C14 style cable from the international cables in the power cable section.

Handles
MX7402HANDLE – MX7 padded handle with rubber overmold and two finger trigger, includes wrist strap, for use with MX7 and MX7CS. Rated down to -22 deg F (-30 deg C.)
MX7504WRSTSTRAP – MX7 Wrist Strap 10 Pack

Cases
MX7404CASE – MX7 Voice Application case with belt. MX7 with rubber protective boot will not fit in this case.
MX7408CASE – Carry case for MX7 without handle with Gearkeeper retractor. MX7 with rubber protective boot will not fit in this case.
MX7411CASE – Carry case for MX7 with handle. For use with retractor MX7412BELT. MX7 with rubber protective boot will not fit in this case.
MX7412BELT – Gearkeeper retractor with belt for use with MX7411CASE.
MX7A413CASENHDL – Carry case for MX7 with no handle, includes shoulder strap. MX7 with rubber protective boot will not fit in this case. Large, tethered stylus can be ordered separately for this case, 9000A510STYLUS.
MX7A414CASEHDL – Carry case for MX7 with handle, includes shoulder strap. MX7 with rubber protective boot will not fit in this case. Large, tethered stylus can be ordered separately for this case, 9000A510STYLUS.

CRADLES
MX7388DSKCRDL – Desktop cradle with spare battery charging, RS-232, USB client, and tethered scanner support. Power supply not included. Must order power supply 9000A321PSACUS or 9000A322PSACWW separately. Works with MX7 ActivSync cables list in the Interface Cables section. Rated for operation bettween 32 deg F and 122 deg F (0 deg C and 50 deg C) and spare battery charging between 50 deg F and 104 deg F (10 deg C and 40 deg C). Cradle will perform “in-unit” battery trickle charging. MX7 with a rubber boot will fit in the desktop cradle. The docking bay adapter cup must be removed before the MX7 is placed in the desktop cradle.
MX7003DSKCRDL – Desktop cradle with spare battery charging, RS-232, USB client, and tethered scanner support. Includes AC/DC power supply and US power cord. Works with MX7 ActivSync cables list in the Interface Cables section. Rated for operation between 32 deg F and 122 F (0deg C and 50 deg C) and spare battery charging between 50 deg F and 104 deg F (10 deg C and 40 deg C). Cradle will perform “in-unit” battery trickle charging. MX7 with a rubber boot will fit in the desktop cradle. The docking bay adapter cup must be removed before the MX7 is placed in the desktop cradle.
MX7004DSKCRDL – Desktop cradle with spare battery charging, RS-232, USB client, and tethered scanner support. Includes AC/DC power supply. Power cord must be ordered separately. Works with MX7 ActivSync cables list in the Interface Cables section. Rated for operation between 32 deg F and 122 F (0deg C and 50 deg C) and spare battery charging between 50 deg F and 104 deg F (10 deg C and 40 deg C). Country specific power cord must be ordered separately. MX7 with a rubber boot will fit in the desktop cradle. The docking bay adapter must be removed before the MX7 is placed in the desktop cradle.
MX7007VMCRADLE – MX7 Passive vehicle cradle. Does not support charging or communication. U-Bracket included. RAM mount MX7A001RAMBRKT-R must be ordered separately. The cradle will not work with an MX7 that has a protective boot on it. The MX7 that has a protective boot on it cannot be mounted in the passive VM cradle.
MX7A001RAMBRKT-R – RAM mount kit for MX7001VMCRADLE and MX8003VMCRADLE, passive vehicle cradle. Attaches to U-Bracket.
MX7008VMCRADLE – MX7 Active vehicle cradle. Supports MX7 charging, USB client and powered RS-232 connector. Must order power supply and cables separately. ** Cradle will perform “in-unit” battery trickle charging. Tethered serial RS-232 barcode scanning supported. Rated for operation to 14 deg F and 122 deg F (-10 deg C and 50 deg C). The RAM Mount kit includes arm, clamp & base. All are size “C”.
**MX7008VMCRADLE – Must order power supply and cables separately. For 12 Volt DC operation, use 9000A079CBL 12ML3. For 18-60 Volt DC input to 12V DC output use 9000301PWRSPLY. For 60-110 Volt DC input to 12V DC output use 9000302PWRSPLY. For 18-72 Volt DC input to 112V DC output use 9000304PWRSPLY. For 110 Volt AC input to 12V DC Output with US Power Cord use 9000A321PSACUS. For 110 Volt AC input to 12V DC Output without AC Power Coprd use 9000A322PSACWW
MX7A002RAMBRKT – RAM mount kit for MX7008VMCRADLE. The RAM Mount kit includes arm, clamp & base. All are size “C”.

CABLES & SUPPLIES
9000301PWRSPLY – 18V – 60V DC/DC power supply with cradle power cable. Will work with the MX7 Active Cradle (MX7008VMCRADLE).
9000302PWRSPLY – 60V – 110V DC/DC power supply with cradle power cable. Will work with the MX7 Active Cradle (MX7008VMCRADLE).
900304PWRSPLY – CALL FOR AVAILABILITY. Power adapter, 18-72V DC input to 12V DC output, includes cable. Will work with the MX7 Active Cradle (MX7008VMCRADLE).
9000A321PSACUS – AC/DC power supply with US power cord for use with MX7 Charge/Comm cables or MX7 Desktop Cradle, MX7388DSKCRDL. This power supply facilitates in-unit battery charging and is used in conjunction with the RS/232 and USB Active Sync cables or can be used with the MX7388DSKCRDL. US power cord included. Will work with the MX7 Active Cradle (MX7008VMCRADLE).
9000A322PSACWW – AC/DC power supply, (C14 type power cord required), for use with MX7 Charge/Comm cablesor MX7 Desktop Cradle, MX7388DSKCRDL. This power supply facilitates in-unit battery charging and is used in conjunction with the RS/232 and USB Active Sync cables or can be used with the MX7388DSKCRDL. Power Cord is not included. A country specific power cord must be ordered separately. Will work with the MX7 Active Cradle (MX7008VMCRADLE).
9000090CABLE – AC power cable, C14 type, Schuko
9000091CABLE – AC power cable, C14 type, Denmark
9000092CABLE – AC power cable, C14 type, Italy
9000093CABLE – AC power cable, C14 type, Switzerland
9000094CABLE – AC power cable, C14 type, British
9000A079CBL12ML3 – Power Adapter, Bare Wire 12 VDC. Will work with the MX7 Active Cradle (MX7008VMCRADLE).
MX7052CABLE – MX7 Charge/Comm Interface Cable, USB Client for ActiveSync. The Charge/Comm cables facilitate Active Sync directly from the MX7 Computer. The charge/comm cables will also support in-unit battery charging. If in unit-battery charging is required, please order the appropriate power supply with each charge/comm cable. This cable connects to a PC USB port.
MX7055CABLE – MX7 Charge/Comm Interface Cable, RS-232 Serial ActiveSync, D9 Female. The Charge/Comm cables facilitate Active Sync directly from the MX7 Computer. The charge/comm cables will also support in-unit battery charging. If in unit-battery charging is required, please order the appropriate power supply with each charge/comm cable. This cable connects to a PC serial port.
MX7057CABLE – MX7 RS-232 Serial Adapter cable, 6in, for use with printers that provide their own source of power. Non-RoHS.
MX7058CABLE – MX7 RS-232 Serial Adapter cable, 6in, for use with printers that provide their own source of power.
MX7060CABLE – MX7 Headset coiled adapter cable, includes quick disconnect headset connector. A headset isstill required.
HX2063CABLE – Cable, Vocollect TCO to LXE QD – Must also order MX7060CABLE or MX7070CABLE. This cable should be ordered when using a Vocollect Headset. It has a Vocollect headset connector on one end and the LXE 4-pin QX connector on the other. The total length of this cable is 6”. One must also order MX7060CABLE to connect to the MX7.
MX7070CABLE – CBL ASSU, AUDIO, 6 INCH, MX7, includes quick disconnect headset connector. This is the MX7 Headset coiled adapter cable which includes the quick disconnect headset connector. This new cable has the coiled section removed and the length has been reduced to 6”.

Miscellaneous
MX7405HOLSTER – Holster for MX7 with handle, belt not included. MX7 with rubber protective boot will not fit in this holster. Belt must be ordered separately.
MX7407HOLSTER – Holster for MX7 with no handle, belt not included. MX7 with rubber protective boot will not fit in this holster. Belt must be ordered separately.
MX7409HOLSTER – Holster for MX7 with no handle and with boot. Boot and belt must be ordered separately. MX7 with rubber protective boot will fit in this holster.
MX7410HOLSTER – Holster for MX7 with handle and boot. Boot and belt must be ordered separately. MX7 with rubber protective boot will fit in this holster.
9200L69 – Adjustable nylon belt for holsters
MX7490BOOT – Black rubber protective boot. Can be used with MX7388DSKCRDL & MX7008VMCRADLE
MX7491BOOT – Yellow rubber protective boot. Can be used with MX7388DSKCRDL & MX7008VMCRADLE
MX7A401HANDSTRAP – Replacement MX7 Hand Strap
MX7A584STYLUS – MX7 Replacement Stylus , 10-pack
9000A510STYLUS – Large tethered stylus which fit the MX7 carry cases, 5 pack
MX7A684PROTFILM – CALL FOR AVAILABILITY. Touch screen Protectitive Film, 10 Pack
LX-213 – Single ear, single headband, headset with noise canceling boom microphone. Adapter cable MX7060CABLE sold separately.
HX1506HSYOKE – Replacement head yoke for single band LX-213 headset, qty 1
HX1508WINDSCRN – Replacement windscreen for all headset microphones, 10 pack
HX1509WINDSCRN – Replacement windscreen for all headset microphones, 50 pack
9000512EARPAD – Replacement leatherette ear piece cover for LX-213 and 502 headsets, 10 pack
9000513EARPAD – Replacement leatherette ear piece cover for LX-213 and 502 headsets, 50 pack